ATTRIBUTES menu

The LOCAL PNL > ATTRIBUTES menu enables you to set the attributes of a panel key to TALK, LISTEN, TALK + LSTN, TALK + FL or DUAL T+L.

Attribute	Description / comments
TALK	Sets a talk from this panel to a destination with no automatic listen to the destination.
LISTEN	Sets a key to listen to the source without talking to the destination at the same time.  Use as a monitor key. Use the volume level up/down buttons under the display (lever key and pushbutton panels) or rotary control to increase listen level.
TALK + LSTN	Sets a talk key with listen.  Use the volume level up/down buttons under the display (lever key and pushbutton panel) or rotary encoder to increase or mute the listen level.
TALK + FL	Sets a talk key with permanently made listen.  Use the volume level up/down buttons under the display (lever key and pushbutton panels) or rotary encoder to increase or mute the listen level.
DUAL T + L	Sets a dual talk and listen key (used only on pushbutton panel types).  Press and hold to activate a talk and listen, or press and release(less than 200ms) to latch a listen on the same pushbutton.

The attribute function

Note:

To return to the SYS CONFIG menu, press the Reply key / Reply key talk button (ATTRIBUTES).